HP1631D Logic Analyzer..Software???

Rik Bos hp-fix at xs4all.nl
Sat Dec 3 16:00:26 CST 2016


Glen,

Are you sure it's the HP 82161 drive that's for the 82176A mini cassette and not the DC100 tapes.
If it's the DC100 tape, it may be possible to read it with a HP-85 or an 9877A tape drive.
It depends on the tape format if the tapes are readable on other systems.

-Rik

> -----Oorspronkelijk bericht-----
> Van: cctalk [mailto:cctalk-bounces at classiccmp.org] Namens Glen Slick
> Verzonden: zaterdag 3 december 2016 22:43
> Aan: General Discussion: On-Topic and Off-Topic Posts
> Onderwerp: Re: HP1631D Logic Analyzer..Software???
> 
> On Sat, Dec 3, 2016 at 12:13 PM, Holm Tiffe <holm at freibergnet.de> wrote:
> > Hi folks,
> >
> > I have an HP1631D Logic Analyzer for some years now und got an HP9121
> > dual Floppy drive that fits to it yesterday.
> > I've tested the drive, formating disks, storing and reading data ist
> > working :-) While reading the Users Manual of the LA I've found out
> > that besides of storing setup- and configuration data on the disk,
> > there should some loadable disassemblers for the HP1631D exist on
> > floppies..
> >
> > The Logic Analyzer is very limited from todays point of view but for
> > example an Z80 disassembler where nice to have.
> > Has someone out here such disassemblers (Z180, 8085, 8080, 6809 etc)
> > for the HP1631D?
> 
> I have a 3.5-inch floppy part number 10342-13012 for the 10342B Bus
> Preprocessor (HP-IB, RS-232C/V.24, RS-449) for HP1630A/D/G and 1631A/D
> logic analyzers. I'll have to create an ImageDisk dump of that floppy.
> 
> I also have a tape somewhere if I can find it that is probably for the either the
> 6800/6802 10307B (64672B) or 6809/6809E 10308B (64671A) preprocessor if I
> remember correctly. I don't have an 82161A HP-IL tape drive to try to read and
> dump that tape. If I find that tape I should send it to someone with a working
> 82161A HP-IL tape drive and the means to dump and archive that tape.



More information about the cctalk mailing list