SGI Indigo, WTB Power supply? Burning smell?
ethan at 757.org
ethan at 757.org
Fri Dec 9 21:48:54 CST 2016
Okay, after a ton of rounding up the parts I finally have the keyboard,
keyboard cable, mouse, Indigo and 13W3 to VGA cable to try to bring my
Indigo back up.
I put my baby on the desk, cable it all up... and burning smell when I
start it up.
So far I can't find anything on the PCBs that looks burned. Everything
smells somewhere between old and burned, so that isn't much help.
But here is where it gets crazier.
I originally had a R3000 Indigo, with Entry graphics as I recall. Or maybe
it had some 3d ass, but it was still 8bit color depth. At some point in
the NASA Auctions I had come across another Indigo that worked, and it had
a R4K cpu board. And then I had a card that went into one of the desksides
that had a Elan set that got you Elan on a deskside (I think.)
I left one of the Indigos outside with a bunch of computers for
craigslisters to come curbcycle, but a homeless guy stole it all took all
the metal and left behind all the smashed up plastic parts (yay.) I
couldn't remember what was in the Indigo I left outside.
After sniffing the PCBs for a minute or so like bomb dog looking for a
burned resistor or cap.... I got to thinking that the PCBs are bigger than
I remembered. Better than I remembered.
I google the part numbers, and low and behold it's a R4K CPU card and a
Elan graphics set. Good for performance, but it's not 100% my first SGI.
BUTTTTTTTT.... there is a different power supply for R4K machines, that is
different from R3K machines. I'm pretty sure the machine I have is my old
trusty Eggbert, and it has a R3K PSU.
So now I need to find (this should be easy?) a R4K power supply for an
Indigo. I don't even know if the boards will work, green LED came on for a
bit then went orange. There was frame buffer output. There was no startup
sound that I knew and loved.
The 9430810 is the R3000 power supply, the 9430812 is the R4000/R4400 PSU.
More information about the cctalk