Sticking a VT100 Keyboard Foot Back On

Rob Jarratt robert.jarratt at ntlworld.com
Sun Dec 11 10:06:02 CST 2016



> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck
> Guzis
> Sent: 04 December 2016 17:53
> To: rob at jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: Re: Sticking a VT100 Keyboard Foot Back On
> 
> On 12/04/2016 08:51 AM, Rob Jarratt wrote:
> > The rubber feet on my VT100 keyboards are falling off. The feet are in
> > good condition, just the glue seems to be failing. Does anyone know
> > what kind of glue should be used to stick them back on reliably?
> 
> Plain old rubber contact cement (e.g. Weldwood or Barge) works extremely
> well.  Make sure both parts to be joined are clean and free of the
remnants
> of the old glue, apply a thin coat to both parts (you may want to mask the
> keyboard off), allow both parts to dry (no longer "tacky").
> Position the foot carefully over the keyboard and press down.  You get
only
> one try to get the positioning correct--the bond is fairly permanent.
> 
> I've done this quite a bit with rubber feet and have never had one come
> loose again.
> 


Thanks for that suggestion. I tried some glue from a bicycle puncture repair
kit and it did indeed work very well.

Regards

Rob



More information about the cctalk mailing list