Stripping an RA80
jnc at mercury.lcs.mit.edu
Sat Dec 31 16:28:41 CST 2016
> From: Tony Duell
> My first thought is to strip this RA80 (that's why I got it!). This
> will provide me with most of the missing parts
> Is there any reason to keep the bare, stripped, chassis, or should I
> let it go as scrap metal?
> Or should I preserve the RA80 as it is, and just use it as patterns for
> the missing bits.
I don't have any problem at all with the concept of stripping the parts you
need off one drive to make the other work. After all, you'd be conserving the
number of complete drives: start with one complete, and one missing some
bits; end with one complete, and one missing some bits.
However, I personally would not dispose of any of the bits, though (except
things which can be easily found, and will continue to be so, like standard
fasteners); once they are gone, they are gone forever.
UNC/UNF parts are easy to source on this side of the pond: I imagine they'd
be easy to find on eBay, or if there's something you can't locate, let me
know, and I can run over to the store and grab it and mail it off.
More information about the cctalk