Olivetti M24 Mounting Bushes for Bus Converter
dkelvey at hotmail.com
Fri Mar 25 17:16:58 CDT 2016
Rob, many of your messages are blank.
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Robert Jarratt <robert.jarratt at ntlworld.com>
Sent: Friday, March 25, 2016 2:25 PM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Fred
> Sent: 25 March 2016 19:10
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
> > I looked up rivnuts and they certainly look similar. They are
> > definitely not standoffs though. I shall look closer at rivnuts.
> also look at nutserts.
> Riv-nuts are pop-rivets with a threaded center. Usable through sheet
> and into blind holes (very carefully) Nutserts call for drilling and
> hole and screwing them in.
> I'm assuming that you are talking about threaded inserts in a plastic
I have posted the pictures here:
The pictures show three things:
1. The square holes that the mountings go into.
2. The top and bottom side of the steel mountings.
3. The top and bottom sides of the nylon (?) mountings.
I find myself to really need the steel mountings to be able to mount the bus
converter, I am hopeful that I can move a couple of existing nylon ones.
More information about the cctalk