Looking for info on a CAMAC module - Kinetic 3912 Unibus Crate Controller
elson at pico-systems.com
Wed Nov 2 20:23:35 CDT 2016
On 11/02/2016 12:53 PM, Pete Lancashire wrote:
> In a past life I did quite a few Test & Measurement setups, started with
> dedicated I/O, then added GPIB, and later VXI
> Always enjoyed the challenge of automating stimulus and measurement.
> In the mid 90s I helped add GPIB to a NIM & CAMAC setup. But never got to
> really play with any of the instruments.
> For 'fun' I want to setup and NIM Bin and CAMAC Crate and since my days of
> connecting to a computer started with a PDP-11. But unless a Unibus box
> shows up that's for another rainy season.
> Anyone with a NIM Bin or CAMAC Create they don't want and is near Portland
> Oregon (due to weight and size) ?
> On another vector, it is sad to see that there is not a 'bitsavers' for NIM
> & CAMAC.
This gear DOES turn up frequently on eBay for reasonable
prices. We supply our lab's needs for replacement bins and
crates that way. I used to build CAMAC modules for nuclear
research as a business. I made my own crate and crate
controller for module testing. It was just the backplane,
no card slots, which was fine to have access to probe the
More information about the cctalk