Stuffing boards with pulled QFP chips
dave at 661.org
Sun Apr 2 07:26:05 CDT 2017
On Fri, 31 Mar 2017, Paul Koning via cctech wrote:
>> On Mar 31, 2017, at 1:51 PM, allison via cctech <cctech at classiccmp.org> wrote:
>> On 03/31/2017 06:32 AM, David Griffith via cctalk wrote:
>>>> I'm down to the last few P112 boards for sale and am pondering
>>>> another run of them because demand is steady. One of the biggest
>>>> challenges for the last run was getting the QFP-packaged 100-pin
>>>> chips in a state such that the pick-and-place robot wouldn't throw
>>>> a fit about slight differences in lead position. The stuffing house
>>>> insisted that I send them new chips. Pulls, though they looked
>>>> perfectly okay to me, were not acceptable. Does anyone here know
>>>> anything about pick-and-place robots using pulled 100-pin QFPs,
>>>> particularly a stuffing house that can work with such chips and not
>>>> screw up?
>>>>  The now-obsolete super-io chips
>> Is this something that an experienced hand can manually do?
> Yes, definitely. 100 lead PQFP is perfectly doable if the lead pitch is
> not insanely small. It takes a good fine tip soldering iron (mine is a
> Weller with a PTS tip), fine solder (preferably real, i.e., 63/37 non-PC
> solder). Liquid flux is a big help, as is a magnifier and bright light
> or modest magnification microscope.
> If you have to do a couple of dozen boards this gets very tedious, but
> for 5-ish it isn't a big deal.
That's why I put this in the context of PNP robots rather than
hand-soldering. My last run of P112 boards was 150 and I'm thinking of
doing another 150 or maybe 200.
dave at 661.org
A: Because it fouls the order in which people normally read text.
Q: Why is top-posting such a bad thing?
Q: What is the most annoying thing in e-mail?
More information about the cctalk