ISC Intecolor 8300 terminal

Gregory McGill arcadeshopper at gmail.com
Fri Dec 15 12:44:13 CST 2017


Thank you all for the information I found a power cord on ebay!  I really
appreciate it!

Greg

On Thu, Dec 14, 2017 at 11:26 PM, Brent Hilpert via cctalk <
cctalk at classiccmp.org> wrote:

>
> On 2017-Dec-14, at 10:20 PM, Chuck Guzis via cctalk wrote:
>
> > On 12/14/2017 08:58 PM, Gregory McGill via cctalk wrote:
> >> I recently picked this up from shopgoodwill and it has an older power
> >> plug.  It is NOT a standard plug as shown in the picture below that is
> too
> >> tall and pins are smaller etc..
> >>
> >> Anyone know the name of this 'standard' so I can find a cable? Or
> possibly
> >> have one  around I can get from you?
> >>
> >> Greg
> >>
> >> https://sgws3productimages.azureedge.net/sgwproductimages/images/8/11-
> 25-2017/310248925111157io.JPG
> >> https://photos.app.goo.gl/HzXVUDqfCv5U7zBC2
> >>
> >
> > From the looks of your unit, it might just be simpler to fit it with a
> > standard IEC receptacle.  Note that the cutout is already rectangular,
> > so an IEC may just fit without any case modification.
>
>
> The screw holes have a slightly different spacing between the two types,
> they have to be 'moved' (filed) out about a mm each;
> and it looks like the existing opening will have to be enlarged vertically
> a bit.
> If there's nothing interfering on the inside it does look like an easy
> candidate for replacement with IEC.


More information about the cctalk mailing list