Help Identifying Components

Rob Jarratt robert.jarratt at ntlworld.com
Sun Dec 24 15:00:15 CST 2017


> >
> > My guess is capacitors also.
> 
> 
> Noting they are paralleling resistors, they're probably just noise/AC
bypass, on
> the order of 0.01 uF, and not overly consequential to understanding the
basic
> circuit.
> 
> Again, one can draw it out with the above presumption and then assess
> whether it makes sense or for alternative functions.
> 
> 
> > This "SMD Code Book"  should be of some value:
> >
> > http://www.sphere.bc.ca/download/smd-codebook.pdf
> >


I am indeed drawing it out. Whether I have drawn it logically or not I am
not sure. I will check it with reference to the main input stage of the PSU,
where this board has come from. Could the reference be associated with the
input voltage auto-sensing? Or is this overly elaborate for that purpose?

That unmarked flat part does appear to have some resistance, about 390ohms
as measured in circuit, so probably the precision trimmed resistor you
suggest.

Regards

Rob



More information about the cctalk mailing list