Changing wire-wrap configurations on DEC circuit boards
jwsmail at jwsss.com
Mon Feb 13 20:46:26 CST 2017
On 2/13/2017 4:09 PM, Bill Gunshannon wrote:
> From: cctech [cctech-bounces at classiccmp.org] on behalf of Earl Evans [earl at retrobits.com]
> Sent: Monday, February 13, 2017 6:45 PM
> To: General Discussion: On-Topic Posts Only
> Subject: Changing wire-wrap configurations on DEC circuit boards
> Hi there,
> I've got a couple of DEC QBUS boards (including a quad SLU) for which
> configuration is set by wire-wrap jumpers. I don't have a wire-wrap tool,
> and have found that trying this by hand without one is not workable.
> Has anyone come up with a clever way to permit reconfiguration of these
> boards without semi-permanent changes? Or, alternatively, what wire-wrap
> tool would you recommend?
> I have a hlf dozen wirewrap tools laying around. I have found little if any
> difference in them. Amazon has them for $10 to about $30 dollars. If it
> matches the size wire your using the Radio Shack works fine for me.
Takes a bit of time for these, but I'd try for one recommended by Bill
or one of these:
30 gauge, so if you want to use the stripper, that size wire will be
needed. They used to have
them with semi safe to use strippers for other sizes. If you are really
worried, get NoNics strippers
if you can find them.
More information about the cctalk