How to refurbish plotter pens?
rdawson16 at hotmail.com
Thu Feb 23 01:27:31 CST 2017
Suggestion: drop them in an ultrasonic cleaner with solvent...
From: cctech <cctech-bounces at classiccmp.org> on behalf of David Gesswein <djg at pdp8online.com>
Sent: Saturday, January 28, 2017 10:34 AM
To: cctech at classiccmp.org
Subject: Re: How to refurbish plotter pens?
On Sat, Jan 28, 2017 at 03:51:49PM +0100, Mattis Lind wrote:
> I am about to get our IBM1627 (rebranded Calcomp 565) going but the pens in
> the case is quite dry. What is the best method to refurbish those? What is
> the best solvent to get the old ink out? What ink to refill with?
That looks like the unpressurized ballpoint. I never tried to refill mine.
Another option is making replacements. I found current ballpoint
refills and cut them down. I used a dremmel with cutoff disk. Watch for
splatters. I then stuck something in to remove 1/4" or so of the ink from
the end. Otherwise it will come out in the pen holder and make a mess.
The problem now is almost all refills use a larger diameter tip. I had to
look around some before I found the proper size. I did grind one larger
diameter one down by chucking it in a drill and grinding with the dremel.
More information about the cctalk