HP 300-series boot rom archive?

Josh Dersch derschjo at gmail.com
Thu Jul 20 00:22:56 CDT 2017



On 7/19/2017 10:43 AM, Peter Brown via cctalk wrote:
>> If yours is dead, a bad power supply is the most likely issue.  The same
>> power supply was used in the 9000/340 but the 340's service manual doesn’t
>> tell you much about the internals of the supply.  The 345 service manual
>> tells you more but the supply for that box is a different model.
> I  had a 9000/375 that would not start a couple of years ago - I think that there was a coin cell on the motherboard - once this was replaced, the machine booted fine.
>
> Peter

Thanks, I gave that a shot.  Unfortunately, it didn't help.  But thanks 
for the suggestion!

- Josh



More information about the cctalk mailing list