gobs of stuff today from recovering a unit of mine.
toby at telegraphics.com.au
Sun Jun 11 19:23:48 CDT 2017
On 2017-06-11 7:41 PM, COURYHOUSE at aol.com wrote:
> Toby - We appreciate the offer but we do not ship things off-site to be
> Someday, if we fall heir to a fast scanner, things will happen
> faster here.
Fujitsu make some very good ones. Around $100 on ebay (that's where I
got mine, fi-4530C). What's it worth to make some progress?
> We have had /'promises'/ of them throughout the years but none have
> We have a hp 7610 which scans and prints to 11x17 and does a nice
> job ...but not fast. For the most part it takes care of what we
> need done but not always extra work.
> It also prints a nice 11x17 blow up of stuff for display building
> too... a marvel for the $150 on sale price... sure can use up ink
> printing Hi gloss color stuff though!
> Ed# www.smecc.org <http://www.smecc.org>
> In a message dated 6/11/2017 4:30:53 P.M. US Mountain Standard Time,
> cctalk at classiccmp.org writes:
> On 2017-06-11 5:21 PM, Ed via cctalk wrote:
> > re: scanning earlier versions - perhaps at some point as we
> have a slow
> > scanner and plenty of other things in line for us to do if you
> > have a usable copy up there.
> I have a fast ADF for things that can be reduced to pages. If I can
> And I'm working on slow methods for things that can't.
> located in Toronto, Ontario
> > will note this though for some future time.
> > Ed#
> > .
> > In a message dated 6/11/2017 1:26:59 P.M. US Mountain Standard Time,
> > cctalk at classiccmp.org writes:
> > Yes, APL is on the Multics distribution tape and runs on the
> > Older versions of manual do have historic interest and having
> them scanned
> > and upload to bitsavers should be considered.`
> > -- Charles
More information about the cctalk