Suggestions why SCSI 80 drive w/ SCSI2 (50) adapter will not spin up ?
pete at petelancashire.com
Mon Mar 20 21:50:51 CDT 2017
Host is a HP 9000/382
Copied the orig drive using a linux box, adaptec 2940N and good old dd
Then swapped drives, a unused 9 GB 80 pin with a Chinese 80 to 50
Did have to issue a spin up command and then copied the data to this drive
again with dd.
Powered all off, added a motor start jumper to the adapter and put it on the
9000/382. Motor will not start, added a jumper right on the drive, no spin.
so .. any ideas what I'm doing wrong, or just try a different drive ?
More information about the cctalk