RT11 Disk Partitioning and RQZX1 SCSI controller
dj.taylor4 at comcast.net
Sun Oct 22 12:10:44 CDT 2017
On 10/20/2017 6:46 AM, Camiel Vanderhoeven via cctalk wrote:
> On 10/19/17, 6:22 PM, "cctalk on behalf of Douglas Taylor via cctalk"
> <cctalk-bounces at classiccmp.org on behalf of cctalk at classiccmp.org> wrote:
>> Is there a potential problem here?
>> I have an 11/53 microPDP11 with a RQZX1 controller connected to a single
>> DEC DSP3043 drive (535MB) and a single RX33 floppy.
>> The autoconfigure setup in the RQZX1 puts the hard disk at DU0 and the
>> Floppy as DU1. OK. I boot RT11 from the disk, V5.7. Works fine.
>> I would like to use some of the extra space on the disk by setting up
>> RT11 disk partitions.
>> However, one of the partitions is DU1, but that is what the Floppy is
>> called. How do I stay away from what seems like a conflict?
> SET DU2: UNIT=0,PART=1
> SET DU3: UNIT=0,PART=2
> ** reboot **
> INIT DU2:
> INIT DU3:
Thanks, it did work. I'll just stay away from DU1:. I forgot about the
reboot required for these changes to take effect.
More information about the cctalk