HP9133 user guide...?
rigdonj at cfl.rr.com
Tue Apr 5 19:29:58 CDT 2005
How about letting the rest of us in on the secret of how to do it! BTW
just got a "new" ICS GP-IB analyzer that I need to try out. It appears to
work the same as the HPs but it's packaged differently and it's alot easier
BTW II. Just picked up a STD bus system today made by Octagon Systems.
This thing kicks ass! 9 MHz 64180 CPU, built-in EPROM burner, 3 serial
interfaces, parallel interface, keyboard interface, Analog input and output
interfaces, uses EPROM, NVRAM or EEPROM and more! Also got the manual for
it, several IO cables, chassis, PSU and a Data Aquisition card.
At 08:52 PM 4/4/05 -0400, you wrote:
>> At least some CS/80 discs support the CS/80 low-level initialization
>> command. It's generally not clear how to do this, but if you go trawl
>> Google Groups for "mediainit vGD" you may find a transcript of how I
>> got HP-UX 7.05 to low-level format a 7946 disc so long ago that it's
>> on topic.
>The documentation does specify a "Format" command for CS-80 devices. I
>have used a bus system analyzer to format a number of drives this way. I
>don't recall formatting a 9133 but, I would be very suprised if it
>didn't work the same way. I have a HP9134 sitting here that was
>formatted last month using the analyzer. The command sequences are very
>unforgiving so doing it with an analyzer takes a LOT of patience!
More information about the cctech