Building M8027 hookup
fireflyst at earthlink.net
Wed Dec 7 13:31:16 CST 2005
I've looked at that manual before posting, and it does not have much to work
out from. All the names of the signals are different.
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Dennis Boone
Sent: Wednesday, December 07, 2005 1:07 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Building M8027 hookup
> But the description says "This cable is designed to connect a line
> printer to any Data Products protocol parallel port _OTHER_ than the
> LPV11-SA" (emphasis added).
Except I think that the emphasis needs to be on the "-SA" suffix,
as the section does refer to the LPV11 with no suffix.
As the wiring given is for a dataproducts, the correct hookup for
a centronics interface would have to be worked out, but they are
> I can find no LAV11 manuals but there is one LPV-11 manual around:
> I think I borrowed it to scan, which is why I cannot find it right
> now. It may have a pinout in there.
A real manual would, of course, completely obviate the problem.
More information about the cctech