HP 98xx manuals (3rd box+)
rigdonj at cfl.rr.com
Mon Jul 25 10:47:36 CDT 2005
Ok that box wasn't quite full so I'm adding these loose manuals:
6) HP Series 200 Computers 9888A Bus Expander Installation and Service.
7) HP 98644A Asynchronous Serial interface Refeence Manual.
8) HP 98620 Direct Memroy Access Controller Installation Note.
9) HP 98625B HP-IB High Speed Disc Interface Hardware Reference Manual
10) HP 98622A GPIO Interface Installation.
11) HP 82906A Printer Owner's manual.
12) HP 98626A RS-232 Interface Installation.
Al & et al,
OK, Third box!
1) HPL Operating Manual contains HPL Operating Manual and Programming
Update for the HP 9826 and 9836 Computers, HP 9000 Series Computers Model
216/226/236 HPL Operating Manual, portions of a HP 3060 manual (the 3060 is
a board test system that used a derivative of HPL called BTL (Board Test
Language)), HPL Condensed Reference (photocopy) and HPL Operating Manual
and Programming Update for the HP 9826 Computer (photocopy).
2) BASIC 3.0 Interfacing Techniques
3) Configuration Reference Manual includes two different Memory
Configuration Wheels (maybe you can take them apart and scan everything
then people can print it all out and make their own), Infotek Systems AM
Series Memory Baord Instation and User's Manual, HP A1401A DIO-I Slot
Upgrade Installation Guide, HP 9000 Series 300 Computer Systems Pricing
Information (Oct 1988), HP 9000 Series 300 Models 310 and 320 Hardware
Technical Data (Sept 1986), HP 9000 Series 300 Computers Configuration
Reference Manual and several Installation Notes for HP memory cards.
4) Service Manual includes HP 98270F Powerfail Option Installation for the
HP 9826 and 9836 Computers, HP 9000 Series 200 Computers Model 226/236
5) BASIC Utilities Library for the HP Series 200 Computers includes some
interesting Installation Notes and Programming Notes in the back including
one on setting up the BASIC ROM card, also a brochure on the HP Series 200
Software available from HP.
These are all in full size (8 1/2" x 11") three ring HP binders.
Had enough yet Al? Or should I keep going? :-)
I found another handy sized box so I packed up some more books. This lot
1) Peripheral Installation Guide, HP 9000 Series 200/300 Computers & 35731
HP Monochrome Monitor Installation Guide
2) Using the BASIC 5.0/5.1 System, HP 9000 Series 200/300 Computers
3) FSD CE Handbook including Model 226/236 Installation Guide & Models 26
and 36 CE Handbook & Model 220 Installation Guide & Installation Notes for
4) Pascal 3.0 User's Guide
5) Installation Reference HP 9000 Series 300 Computers Model 375 & BootROM
Configuration Mode User's Manual, HP 9000 Products & Use with Terminals and
Monitors, Series 300 Computers
6) BASIC Language Reference Volume 2: O-Z, HP 9000 Series 200/300
These are also "short" manuals in three ring binders. BTW I have some
HP-UX manuals but some of them are paperback bound. Can you scan them
without damaging them?
These should also get into today mail. If I can find more boxs, I'll
pack more books.
OK I'm packing up a box of HP books for you. I'm including:
1) Using HP BASIC for Instrument Control, a Self-Stufy Course
2) BASIC 5.0/5.1 Graphics Techniques
3) Installing, Using and Maintaining the BASIC 5.0 System
4) Pascal 3.1 User's Guide
5) Installation Guide HP 9000 Series 200 Model 226 and Model 236.
6) BASIC 5.0 Interfacing Techniques, Volume 1: General Topics
These are all in the grey HP three ring binders and are all short
(roughly 8" x 8 1/2") books. These cover a variety of topics and should
make a good start. I specificly included the Installation book (#3) since
it contains the information that Tony needs. It's probably the starting
point for everything esle but it's actually a very difficult book to find
and the reference manuals and such don't cover such basic topics as how to
boot the machines or how to create or save the operating system.
I'll probably ship this box today via USPS Media mail. I'll also go
ahead and start packing some more books.
At 05:05 PM 7/24/05 -0700, you wrote:
> I guess you don't have the manuals for this. AFIK I have the full set of
>manuals for BASIC 5.1 along with a bunch of other useful related HP manuals
>such as the HP 9826/9836 and HP 9000/300 Series Computer Installation
>manuals, various peripheral configuration manuals, BASIC 2.1 and 3.0
>manuals, HPL manual, Pascal manuals, Self-Study Guide to Instrument
>Interfacing using HP Basic, FSD Customer Engineering Manual and more. This
>stuff needs to be made available to the everyone. Al has asked about
>borrowing the stuff and scanning it and I've told him that he can but we
>haven't done anythng to make it happen yet. But it's about time that we
>did. How about it Al? Do you have time to do this stuff yet?
>I'll make time to get it done. I have a couple of other manuals to get
>on line (like the other PASCAL manual and the 9836 service manual)
>Was talking to a friend of mine today who makes a little Ubicom board
>and I suggested he implement an HPIB interface on it and implement
>enough of a emulator to provide an HPIB peripheral to Ethernet interface.
>Then, you could have a box on the net simulate the rest.
More information about the cctech