Floppy drive pin 2 question?
cctalk at randy482.com
Thu Mar 10 19:57:00 CST 2005
From: "Pete Turnbull" <pete at dunnington.u-net.com>
Sent: Thursday, March 10, 2005 5:29 PM
> On Mar 10 2005, 20:33, Jules Richardson wrote:
>> Just futzing around with this Manta board (SCSI floppy controller).
>> The docs I have say that pin 2 of the floppy connector is normally
>> input to the controller from the drive, but that some drives expect
>> 2 to be an output to the drive from the controller (e.g. for changing
>> rotation speed on a drive capable of 300 and 360rpm)
>> That sounds wrong to me; surely most drives either don't use pin 2
>> anything, or they expect it to be an output from the controller (to
>> with things like speed changes)
> Yes, but I believe some drives did use pin 2 to signal the controller
> in some way. I've never (knowingly) come across one, but I'm told some
> Apple drives did this.
> Pete Peter Turnbull
> Network Manager
> University of York
I have a webpage on disks and disk drives, I mention the Apple but that
My page is 99% SA400 & SA800 based interfaces.
For other disk drives only the FM & MFM discussions may apply.
More information about the cctech