TU-56 capacitor repair (part numbers)
jwest at classiccmp.org
Sun Mar 20 13:58:22 CST 2005
I finally found the info on suggested TU-56 cap repair from the guy who
actually did it with these parts. Here is what he had to say:
> The capacitors are from www.newark.com part number 89F2059 with bracket
> These must be replaced in pairs.
> Attached is a JPG of the mounting plate made from a 1/16" thick aluminum
> plate. The image should be to scale. The height is 5" and width is 4.3"
> The plate is attached using 0.5" 8-32 standoffs from www.digikey.com part
> number 8427K
> You will also need 1/4 and 3/8 8-32 screws.
Note that the caps he found & used are slightly different size than the
originals, hence a different mounting plate and brackets.
Hope this helps everyone! I can put the .jpg file refered to up if people
want to see that too.
More information about the cctech