Need help configuring DZQ11s on 2.11BSD for VCF!
ak6dn at mindspring.com
Mon Oct 31 16:11:13 CST 2005
So if I run sysgen is /usr/sbin I get:
Type device names one per line, optionally followed
by a comma and a repeat count. Finish with EOF.
Table of standard DEC assignments for configuration:
DEVICE CSR VECTOR
DZ11 760070* 0300*
DZ11 760100* 0310*
UDA 772150 0154
TMSCP 774500 0260
DEQNA 774440 0120
CSRs and vectors marked '*' are in floating space.
So it looks like maybe the 2.11BSD autoconfig is only really finding
your second DZ11 and not the first?
Don North wrote:
> When I brought up my 11/44 with 2.11BSD I also had to fiddle with the
> /etc/dtab file, which allocates CSRs/VECTORs to devices (ie, tells the
> s/w what you did to the hardware). Your second DZQ is probably being
> probed by s/w as a floating device (160070 ??) or at least not at the
> address you have the h/w set to.
> I had to change the /etc/dtab entry for my first DZ11 to 160100/300
> from 160100/310 to be compatible with SIMH (I don't configure the TU58
> at 176500/300 under SIMH and/or 2.11BSD).
> Don North
> Robert Armstrong wrote:
>>> I don't know BSD at all and can't verify the CSR/vector above
>>> without looking some things up, but... on many Unix systems you
>>> need to make the device files (/dev/tty???) that correspond to the
>>> terminal lines. Has this been done? Although perhaps this needs to
>>> wait until init sees the device?
>> Thanks, John - good point. I didn't mention it in my original posting,
>> but I already did this too. The script is called MAKEDEV and it
>> creates the
>> /dev/ttynn nodes - in this case tty08..tty15. All the /dev/ttyxx
>> are there but none of them on the second dz work - they give "device
>> configured" errors when you access them.
>> BTW, as far as I know it's tty08..tty15 because 2.11BSD thinks it's
>> talking to a DZ11 (i.e. UNIBUS, not QBUS) and DZ11 cards have eight
>> each. AFAIK it doesn't matter because the software interface for the
>> DZ and
>> DZQ is the same except for the missing lines. Certainly there's
>> nothing I
>> can find in 2.11BSD or 4.3BSD about a special driver or setting for DZQs
>> So I would expect the first DZQ to be tty0..tty03 and the second one
>> to be
>> tty08..tty11. In any case (as you said) I don't think it would
>> prevent init
>> from configuring the device, but I might be wrong :-)
>> Thanks again,
More information about the cctech