Homebrew Circuit Boards: Methods? Supplies?

Jeff Walther trag at io.com
Mon Sep 12 14:25:38 CDT 2005


>Date: Wed, 07 Sep 2005 12:46:20 -0700
>From: Marvin Johnston <marvin at rain.org>
>Subject: Re: Homebrew Circuit Boards:  Methods?  Supplies?
>To: cctalk at classiccmp.org
>Message-ID: <431F438C.E21624B2 at rain.org>
>Content-Type: text/plain; charset=us-ascii
>
>
>>  From: Jeff Walther
>
>>  In fact, I have not been able to find precoated board (photoresist
>>  coated) in the .050" thickness.  So I will either need to use a
>>  liquid photoresist or try a toner transfer system.
>
>Personally, I would avoid liquid photoresist and use dry film in its
>place. You could contact Fred at Far Circuits
>(http://www.farcircuits.net/) as he will supply boards precoated with
>dry film photoresist. URL for supplies is
>http://www.farcircuits.net/supplies.htm. According to the site, he will
>supply 0.047 material laminated with Dupont PM115 photo resist film.

Now he tells me?!  :-)   I'm already down the road with the uncoated 
.047" board.   If that yields poor results I will try Far Circuits. 
Thank you for that source.   I searched all over the place and never 
found that page.  Sigh.

Jeff Walther



More information about the cctech mailing list