1350A vs 1351A

[Bob Shannon]

I have both boxes attached to systems, I can try to test this.

I have a few test patterns that were written for the 1350 that do not
display correctly on the 1351 however (odd!).  So am I sure that
there is a real difference in how they react when you plot past
the limits, whatever they are.

----- Original Message ----- 
From: "Tony Duell" <ard at p850ug1.demon.co.uk>
To: <cctalk at classiccmp.org>
Sent: Friday, April 21, 2006 5:55 PM
Subject: Re: 1350A vs 1351A


>> 
>> <>No, I'm not sure. It's been a long time. However that's the 
>> resolutions given in the manual for the 1350 and
>> in the HP 1980 and 1982 catalogs. Probably they are just rounding it 
>> off. The manual does mention the X=1022,
>> Y=1023 max values for a plot absolute command.
> 
> I looked in my HP1350 manual, and it's inconsistant. At one point it 
> claims the resolution is 1022*1023, at another place it gives the range 
> of parameters to the plot command as 0-1022 and 0-1023. Personally, I 
> believe the latter, there are good hardware reasons why that's the case.
> 
> -tony
>