On Topic: PDP-11/34 FP11-A board question

[Henk Gooijen]

>From: Patrick Finnegan <pat at computer-refuge.org>
>Reply-To: "General Discussion: On-Topic and Off-Topic 
>Posts"<cctalk at classiccmp.org>
>To: "General Discussion: On-Topic and Off-Topic Posts" 
><cctalk at classiccmp.org>
>Subject: On Topic: PDP-11/34 FP11-A board question
>Date: Mon, 28 Aug 2006 23:14:27 -0400
>
>So I picked up an FP11-A this week.  Looks like it might need some
>over-the-top connectors to hook it up to my 11/34 (whenever I get that all
>put together...).
>
>Anyone have any idea what I need as far as connectors/cables/etc and what
>exactly it hooks to in the CPU cardset/backplane?
>
>Thanks,
>
>Pat
>--
>Purdue University ITAP/RCAC       --- http://www.rcac.purdue.edu/
>The Computer Refuge               --- http://computer-refuge.org

Check my website (www.pdp-11.nl) and open the 11/34A folder.
If you have an 11/34 you cannot use the FP11-A, you must have the 11/34A
board set. You'll see that you need two OTTs. They were available on eBay
last week. ISTR the seller was "sammyslave", but I am not sure.

- Henk, PA8PDP

_________________________________________________________________
500 foto's per maand uploaden, GRATIS! http://spaces.live.com