Unibus 4-SLU ACT 10015 switch settings

[Jay West]

Regarding the ACT - Able Computer Technologies - 4 SLU board model 10015 
Quadrasync/B

Able just gave me the switch settings:
Switch  4 - Address Selection A10
            2 -                            A09
            5 -                            A08
            1 -                            A07
            6 -                            A06
            3 -                            A05
            7 - Vector Bit 08
          10 -                 07
            9 -                 06
            8 -                 05

And if you add what Christian wrote below... that's complete docs for the 
board (less schematics of course ;) )..

I'm certainly left wondering how one sets word structure though.

Christian wrote....
> The pinout of the Berg connectors are the same as for the DL11-E cards:
>
> Berg 3M Signal
> -------------------------
> UU 1 GND
> VV 2 GND5F
> TT 3 +5Vdc
> DD 15 DTR
> V 23 RTS
> J 33 RxD
> F 35 TxD
> FF 14 Secondary TxD
> X 22 Ring Ind.
> BB 18 Carrier Detect
> T 26 CTS
> JJ 12 Secondary RxD
>
> The rotary dials select the baud rates for each of the four channels. The 
> positions are:
> 1 9600
> 2 4800
> 3 2400
> 4 1200
> 5 600
> 6 300
> 7 150
> 8   75