RX02 Problem solved...
Gordon JC Pearce
gordon at gjcp.net
Tue Oct 10 15:49:00 CDT 2006
Tony Duell wrote:
> I can see no obvious reason why you'd get more errors on inner tracks if
> the alignment was off. The errors would be on all tracks I would think.
> Unless your leadscrew is so warn that the head is not properly postiioned
> (I have _never_ seen that happen).
I've seen a drive pick up a nice thick coating of dust and fuzz on the
stepper lead screw, which prevented the head from travelling all the way in.
More information about the cctech