CompuPro floppy controller differences
ajp166 at bellatlantic.net
Sun Sep 10 09:15:02 CDT 2006
>Subject: RE: CompuPro floppy controller differences
> From: Allison <ajp166 at bellatlantic.net>
> Date: Sun, 10 Sep 2006 09:13:54 -0400
> To: cctech at classiccmp.org
>>Subject: RE: CompuPro floppy controller differences
>> From: "Richard A. Cini" <rcini at optonline.net>
>> Date: Sat, 09 Sep 2006 13:59:08 -0400
>> To: "'General Discussion: On-Topic Posts Only'" <cctech at classiccmp.org>
>> I looked at the CompuPro disk image on Dave Dunfield's site and it's
>>for an 8" drive. The defining thing for me is getting a CP/M 2.2 image in
>>5.25" format. I've found another controller, from CCS (California Computer
>>Systems) that might work, too. So does anyone have a 5.25" CP/M 80 image for
>>either of these two boards?
>All my CCS disks are 8" I'd have to look to see if the controller even did
>5.25 it's been so long. I do remember the CCS used a banking scheme that
>didn't agree with most of my systems.
I decided to pull out the CCS system and check. I'd forgotten as it
smaller than most s100 crates and it gets tucked away easily. It does
do 5.25" though the docs refer to 8" disti media only.
The Eprom on mine has the MOSS monitor and boot, IO expects standard CCS.
If you have CCS IO you at least have a monitor.
More information about the cctech