CompuPro floppy controller differences
cclist at sydex.com
Sat Sep 16 00:47:06 CDT 2006
On 9/15/2006 at 9:37 PM Richard A. Cini wrote:
What Dave said, but a few reminders.
First, make sure that the drive is jumpered for high density by default,
since the density select line won't be active on the 8" connector.
Most 1.2MB 5.25" drives are jumpered to provide DISK CHANGED/ status on
pin 34; I believe the Disk 1 requires READY/, so change your jumpers
More information about the cctech