IDE Qbus controller (was TU-58s)

[Allison]

>
>Subject: Re: IDE Qbus controller (was TU-58s)
>   From: Roger Ivie <rivie at ridgenet.net>
>   Date: Wed, 18 Apr 2007 12:40:41 -0700 (PDT)
>     To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org>
>
>On Wed, 18 Apr 2007, Allison wrote:
>> Devices that arent MSCP like DD(tu58), DK(RX02), DY(RX02),
>> DL(RL02) might make for examples. I'm fortunate to have
>> the uncut sources on RL02.  Unfortunately I'm not an
>> experienced PDP-11 programmer. The upside is I have the
>> RT-11 docset.
>
>You might take a look at the sources for the Pro350/380 hard
>disk driver. IIRC (I did some mucking about with that driver,
>although it has been years), the controller was quite similar to 
>the WD1010 stuff that eventually became IDE.
>-- 

that is helpful info.  I suspected there were other drivers that 
might be closer to the hardware then the MSCP route.

Allison