HP 2117f cables needed

[Glen Slick]

On 1/12/07, Jay West <jwest at classiccmp.org> wrote:
> Glen wrote....
> > EDAC makes card edge connectors that mate with the usual 48 position
> > connector cards, but they are not standard stock items that you can
> > order anywhere that I have found.  I requested a sample and got a
> > couple.  I forget the exact part number without checking.
> Careful, you'll need both single registration and dual registration
> connectors, both 48 pin and both look the same initially.
>

What's the difference between single and double?  Top and bottom are
connected together for each position on single, or something else?

This is the connector I got from EDAC, except 305-048-500-202 instead
of the stocked 044:

http://rocky.digikey.com/WebLib/EDAC/Web%20Photo/305-044-500-202.jpg

There are various mounting hole options encoded in the last section of
the part number.  See the full spec for details.

http://www.edac.net/downloads/305-315-355%20Series%20Spec%20Sheet.pdf

Digikey quotes 244.06 / 25 = $9.76 for the 305-050-500-202 so that
might be about what the price would be for the 305-048-500-202.
That's about twice of SammySlave's used eBay price (or about the same
after paying him shipping), but no hood.

-Glen