Pictures of My Machine Room (So Far)

[Fred Cisin]

> >OB_CC: Where can you get plywood that matches the Northstar Horizon?
> >The "home" stores don't even have the right thickness!

On Sun, 17 Jun 2007, Allison wrote:
> That grade is for real carpentry not home despot wonder projects.
> The stuff used was real 3/4" finish grade with what appears to be oak
> veneer (mine is).  The originals were fairly tough veneer and well
> fitted.  Mitered corners and two cleats in the corner for a bit of
> stiffness.  The front edge has a routed slot on the inside top and
> two sides to slide over the front pannel plate, The slot is 9/64
> maybe 5/32" wide.  Most of the early machines came with the dark
> stain wood but I'd like to find a metal one (less RFI).

At one point Northstar was buying at Ashby Lumber, but I don't know for
sure that that was for the Horizon.

> One of my NS* Horizon is wood cover and the other is missing the
> cover so I have a Lexan cover plate to allow airflow.

There seem to be a LOT of missing Horizon covers!


--
Grumpy Ol' Fred     		cisin at xenosoft.com