Someone in the UK who can make an 8" disk from my NEC APC images?

[Dave Dunfield]

>  Wouldn't it be better for this gentleman to get a 5
> 1/4" or 3.5" drive working in his APC? I had been
> working on an adapter to do the opposite - to connect
> one of the 8" floppies to a peecee, but I guess I got
> distracted and the project fell by the wayside.

I get the impression he's not into making connectors and
cables ... Also, the system is known to work - in fact,
he still has a couple of boot disks, but they are dedicated
to various software packages and he does not have the full
CP/M disk with utilities.

I was hoping that there might be someone in the UK who has
already got a working setup to recreate 8" diskettes with
ImageDisk - I can do it here, and make a boot disk which
works in my APC in a couple of minutes using the images
that I have posted on my site - If someone "over there"
can do this, it would be easier to get the diskette to
him.... Alternatively, is someone has a working APC with
working 8" drives, a copy of the disk made "native" would
be fine too.

Dave

PS: I posted the design for a very simple and easy to make
adapter to put an 8" drive on a PC using a standard 5.25"
PC cable on my site. Too me about 10 mins to make it.

--
dave06a (at)    Dave Dunfield
dunfield (dot)  Firmware development services & tools: www.dunfield.com
com             Collector of vintage computing equipment:
                http://www.classiccmp.org/dunfield/index.html