Power plug for a VAX 4000-300

[Sridhar Ayengar]

Rod Smallwood wrote:
> Hi
>     Having just increased my collection with a VAX 4000-300 I have hit
> on a minor problem. 
> The mains connector into the H7874 PSU is a normal IEC  connector with
> one exception.
> Directly below the middle pin is a rib or ridge that would require a
> groove or slot in the 
> mating free connector.
>  
> Before I start hacking up cables does anybody recognise this plug.

IEC C15/C16.  Same wattage, but higher temperature, if memory serves.

Peace...  Sridhar