TTL RGB ==> PC

[Doc Shipley]

Chris M wrote:
> --- Chuck Guzis <cclist at sydex.com> wrote:
> 
>> On 17 Nov 2007 at 10:22, Gordon JC Pearce wrote:
>>
>>> >From memory, and it was a while ago, we had three
>> voltage dividers to
>>> knock the TTL outputs down to .7v, and then three
>> more resistors from
>>> the intensity bit to the analogue outputs.
>>>
>>> There may have been some diodes there.
>>>
>>> The sync combiner was a couple of resistors and a
>> transistor.
>>
>> It can also be done with a 74LS06 OC inverter and a
>> few resistors.  A 
>> fancy version might use a '221 one shot to adjust
>> sync pulse position 
>> and width.  I think the one I used to drive an RGB
>> monitor with SOG 
>> from a VGA output used a 74HC86 XOR and was
>> self-powered.
> 
>  what would be nice if there was an area for the group
> to act as a *scratch pad*. So some of this stuff could
> go down *on paper*. Thoughts?...

   Something like this?

   http://www.classiccmp.org/kb/


	Doc