ajp166 at bellatlantic.net
Wed Oct 10 14:29:07 CDT 2007
>Subject: Re: DEC RSX-11
> From: Holger Veit <holger.veit at iais.fraunhofer.de>
> Date: Wed, 10 Oct 2007 13:19:57 +0200
> To: General Discussion: On-Topic Posts Only <cctech at classiccmp.org>
>Ethan Dicks schrieb:
>> On 10/9/07, Allison <ajp166 at bellatlantic.net> wrote:
>It is probably @[1,2]SHUTUP.CMD, or better RUN $SHUTUP
>>> TO change admin password how, and which account again?
>and then modify the UIC [1,2].
It's "run $acntres" on this beastie. However any attempt to modify
the accounts or add accounts causes a illegal instruction trap and
return to prompt.
Could it be the files are protected? I did insure the disk write
protect was disabled and working.
>Basically, any account [1,x] is privileged, so you might create a new
>account in this range before
>fiddling with the old one and maybe accidentally disabling it (happened
>to experience this myself :-))
Fortunately when the system boots the startup.cmd also logs in account
>for one set.
Very helpful, save for Acrobat say the files are corrupt for any of the more
useful ones and crashes for manuals over 25MB.
I'm not sure anything useful other than a "Pregen"ned system is on
the disk as I havent found any languages.
More information about the cctech