top2049 programmer as 74xxx chip tester

Pete Turnbull pete at dunnington.plus.com
Mon Oct 22 17:19:10 CDT 2007


On 22/10/2007 23:04, Alexandre Souza wrote:
>>> Do you know if that's similar to an ALL-02?  I have a couple of these,
>>> though only one ISA card, and I have the disk with the software, but I
>>> can't get it to run on under DOS on a modern PC -- it looks like the PC
>>> is too fast.
> 
>    Strange. If I'm not mistaken, ALL-02 is almost the same of the 
> ALL-03, incluiding the same board (SAC201?). I use my ALL-03 into a P3 
> PC with no problems

Hmm... I'll have to go and check the card to see what it is, but the 
machine it's in is a P3 or maybe even a P2.  I wonder if it would be 
worth trying a copy of your software?  I'll trade you some SGI/Irix info 
for a teledisk image or a zipfile :-)

However, a realistic solution might be to replace the workshop pentium 
that's hardly used one a year with the 486DX4 that's currently 
preventing the door from moving in the breeze.

-- 
Pete						Peter Turnbull
						Network Manager
						University of York



More information about the cctech mailing list