MFM or ESDI QBUS controller for one PDP-11/23 PLUS

[Allison]

>
>Subject: MFM or ESDI QBUS controller for one PDP-11/23 PLUS
>   From: "Sergio Pedraja" <spedraja at gmail.com>
>   Date: Mon, 08 Oct 2007 18:56:57 +0200
>     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>
>Hello.
>
>As the subject say, I'm searching for one working MFM (not RQDx, better
>something like the Andromeda UDC) or ESDI QBUS controller plus cables to use
>with one PDP-11/23 PLUS. The ESDI would be a better choice because I have
>one 300 Mb HD and one 700 Mb HD, both of full-height (in the terms used with
>old PeeCee's).

I'm perplexed.  The RQDXn controllers are MFM and Floppy.  Best shot 
is late firmware RQDX3 as it does RX33 and most all MFM drives.  Its
also easier to find.


Allison


>
>I have too a couple of RX33 floppies but no controller for them. I would
>appreciate to obtain one.
>
>Finally, I am thinking in use one old PC enclosure for disks and floppies.
>Someone has did it ? Results ?
>
>Can contact privately with offers.
>
>Thanks and Greetings
>Sergio