Zen and the art of RL02 maintainance

[Patrick Finnegan]

On Thursday 13 September 2007, J Blaser wrote:
> Lastly, be cautious around the head actuator.  The heads and the
> spindle (plate) are carefully aligned, and I wouldn't remove or
> adjust either of these.  Unless, that is, you have the printsets and
> proper tools (which I don't).

Actually, the RL02/RL01 is an embedded servo drive, so "head alignment" 
generally isn't critical, at least like it is with the RK0n drives.

Pat
-- 
Purdue University Research Computing ---  http://www.rcac.purdue.edu/
The Computer Refuge                  ---  http://computer-refuge.org