Atari ST connectors (was: Atari SIO bus connectors found
cclist at sydex.com
Tue Sep 25 12:47:32 CDT 2007
On 25 Sep 2007 at 13:21, Roger Merchberger wrote:
> ... But the video connector is a 13-pin DIN which can be had from Mouser
> now, and might be stocked at Digi-Key.
When I started fooling with the ST, the video connectors were near-
unobtainium. I made my own using a bit of 0.100" perfboard, some D-
connector crimp pins and some epoxy potting compound. The connector
worked until the day I sold the box, almost 20 years later.
JDR did have the ACSI connector back then. My hard disk was an OMTI
SCSI-to-RLL converter board with another homebrew board piggybacked
on to it to accommodate signal differences between SCSI and ACSI.
It worked well. I still have my driver code somewhere--as well as a
PCB design program for the ST.
More information about the cctech