Looking for a M8330 or a couple of SN74194's
ard at p850ug1.demon.co.uk
Wed Apr 2 17:00:40 CDT 2008
> On Mon, 31 Mar 2008, Tony Duell wrote:
> > I don;t know what test gear you have, but I find a simple logic probe to
> > be more use than a 'scope for this sort of problem. The former can easily
> Yes, logic probes are very handy. They are small and easy to use, and I
I rarely use a 'scope when debugging digital circuitry. For a long time I
used a cheap Radio Shack (!) logic probe -- I got my PDP11/45 and PDP8/e
running with just that (and a VOM to check the power supplies). After
spending a weekend sorting out a Whitechapel MG!, I bought a LogicDart
and never looked back.
I do have a larger (and better) logic analyser, which has proved very
useful on occasions, but the Dart is a useful handheld instrument that'll
help with 99%+ of faults. Pity it's no longer made....
> have found faulty devices most of the times just with the logic probe. The
> seven-segment display show transitions and illegal voltage levels (or no
> voltage at all), very useful e.g. for dead totem pole outputs (in this
I've seen that too. Particularly in 74Hxx devices for some reason.
Many logic analusers only detect 0 or 1 (they have a single threshold on
the input). A logic probe (and indeed the LogicDart) is better for this
sort of fault becuase they also detect illegal levels.
> case the voltage of the signal will be determined by the input stage(s)
> and lies around 1-2V).
> >> I also return all systems to working order. Apart from a couple of
> >> VT420's with ticking SMPSU's everything I have restored runs. (Three
> > Any reason you';ve not fixed those? Ticking SMPSUs are often quite simple
> > to fix, maybe just dried-up capacitors.
> I think ticking PSUs in displays are a sign of a shorted HOT and/or
> flyback (had this case several times).
Yes, you're right. I'd mentally assumed he'd run the PSU on dummy load,
but I guess not. I know the VT300 series are famous for bad flybacks,
dunno about the VT420.
More information about the cctech