MC3470

[Tony Duell]

> 
> On 03/02/2008 23:59, Tony Duell wrote:
> 
> > Do you mean that? I thought the output (pin 10) pulse width was set byu 
> > the RC network on pins 8 and 9. Do you really mean that the offset adjust 
> > preset is used to get all the pulses equally spaced, rather than occuring 
> > in pairs (which is the most likely result of an imbalance in the cicuit, 
> > I think).
> > 
> > Or do you adjust for 50% duty cycle at some other point?
> 
> You adjust the offset adjust preset for a 50% duty cycle output, 
> according to the Sony manual.
> 
> -- 
> Pete						Peter Turnbull
> 						Network Manager
> 						University of York
>