8/S Replica

[Grant Stockly]

>>Hmm.  I get $5 per board, and that's assuming you can get quantity 100 of
>>each of the module types!  For a single replica, you'd pay more per board.
>>I didn't get prices around $2 until quantities closer to 250 per design.
>>Unless you know some place a lot cheaper than I do.
>
>
>Say $.25 to $.50 per sqr inch 4 layer. Contact fingers extra but not 
>a whole lot, Pre-panelized (say 100 1x2" breakaway pcbs on a 14X18 
>panel) maybe 10,000 sq inches purchase qty (50 panels).

If you use a 12x14 panel with no silk screen or solder mask and 
choose PCBExpress you can get down to $.12 per square inch.

Grant