OS/2 problems

[Eric J Korpela]

Sorry, I don't have any v2 disks.  Just 1.0, 1.3, 3 and 4.

You probably need for find a driver for your SCSI interface.  Often
that means copying the boot disk (or the second disk, depending upon
the OS/2 version), freeing up some by getting rid of a driver you
don't need, adding your driver, and editing config.sys to add your
driver.  What interface is it?  I may have a driver in my
collection...  Through 3.0 drivers were 16bit model, but not always
downward compatible, so if you can't find a 1.1 driver, you can try
the 2.1 driver.

Eric


On Sat, May 31, 2008 at 8:09 PM, Teo Zenios <teoz at neo.rr.com> wrote:
> Anybody happen to have disks for OS/2 2.1? I tried installing it today on my PS/2 65SX and disk #8 is bad. not sure if anything past that is good or not.
>
> Also I tried installing OS/2 1.1EE onto the same machine but fdisk could not find any drives. Since that machine is SCSI does OS/2 expect ESDI drives?
>
> TZ
>
>