Tandy TRS-80 Model 4

[Michael B. Brutman]

The Sams Computerfacts for the Model 3 says the following about opening 
the case:

"Place Computer on its side. Remove ten screws from the cabinet bottom. 
Carefully place Computer in upright position. Remove one remaining screw 
from rear of cabinet. Very carefully remove CRT and cabinet top, lifting 
straight up and setting it aside to the left (if facing CRT). Be careful 
not to exceed the length of the video cable."

How good is this procedure?  Is the tube fairly well secured to the top 
half of the cabinet?


Mike