VAXstations

[Robert Jarratt]

> -----Original Message-----
> From: cctalk-bounces at classiccmp.org [mailto:cctalk-
> bounces at classiccmp.org] On Behalf Of Curtis H. Wilbar Jr.
> Sent: 05 November 2008 03:43
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: VAXstations
> 
> 
> I have some VAXstations available for those that are interested...
> 
> 1 x VAXstation 3100 (M30)
> 1 x VAXstation 4100 (M40) missing 'door' for front bays
> 2 x VAXstation 3100 M38
> 2 x VAXstation 3100 M76
> 
> all have 8 plane graphics except for the M30 (or was it the M40?).
> 
> all have 8M of RAM.
> 
> Other than the 4100 and one M38, these systems are in excellent
> cosmetic condition (may require some cleaning).  The M40 has
> plastic 'issues' (missing front bay door, some hidden cracks), and
> an M76 has a 2" scratch in the top.  One of the M38's top doesn't
> look like it fits as good as on the other M38 and is a bit more
> dinged up.  Other than that and that most require some cleaning,
> they are in excellent condition.
> 
> Systems do not have hard drives.  I do have 1G and 2G 50 pin
> SCSI drives available though (non DEC).
> 
> Add 1G drives at $10 each, Add 2G drives at $15 each.
> 
> If you are interested in a specific one, please make an offer.
> I'll likely be listing these on eBay depending on interest here.
> 
> Buyer will be actual shipping plus $5 to cover packing materials.
> 
> -- Curt

I assume you are in the US, so shipping whole VAXstation would probably be
too expensive for me. However, I would be interested in your 1GB drives, are
they small enough for a M38 to boot from? If so, how much to ship a couple
to the UK?

Regards

Rob