Wanted - copy of HP E2450-17504 Symbol Utility (for HP 16500B)

Rik Bos hp-fix at xs4all.nl
Thu Dec 3 04:21:20 CST 2009


 

> -----Oorspronkelijk bericht-----
> Van: cctalk-bounces at classiccmp.org 
> [mailto:cctalk-bounces at classiccmp.org] Namens Glen Slick
> Verzonden: donderdag 3 december 2009 0:18
> Aan: General Discussion: On-Topic Posts Only
> Onderwerp: Re: Wanted - copy of HP E2450-17504 Symbol Utility 
> (for HP 16500B)
> 
> On Wed, Dec 2, 2009 at 1:35 PM, Philip Pemberton 
> <philpem at philpem.me.uk> wrote:
> >
> > I'd still rather like a copy of the original HP install 
> floppy... this 
> > approach is quite hackish in my opinion.
> >
> 
> The E2450A files used to available on the HP/Agilent website. 
>  It was either a .zip of the files, or just all of the plain 
> files.  Your "hack" solution was basically what the real 
> install method was.  Tree copy all of the files to a floppy, 
> boot the system with the floppy inserted, and then the system 
> software would automatically (or maybe prompt first, I 
> forget) tree copy all of the E2450A files to the system 
> directory on the hard drive.
> 
> This is the set of the E2450A files that were available at 
> the time I grabbed them from the HP/Agilent website:
> 
> opt5_032 - HP16500C Symbol Reader    V01.02
> optc_032 - 166XC/167XA Symbol Reader V02.00
> opt_032 - HP16500B Symbol Reader    V03.06
> messages\default\alloc.ini
> messages\default\design.ini
> messages\default\errmsg.ini
> messages\default\explain.ini
> messages\default\fatal.ini
> messages\default\fmgr.ini
> messages\default\ns.ini
> messages\default\nsr.ini
> messages\default\nssrch.ini
> messages\default\omfchck.ini
> messages\default\omgr.ini
> messages\default\readers.ini
> messages\default\try.ini
> messages\default\readers\gpa.ini
> messages\default\readers\omni.ini
> objects\addr.mod
> objects\bintree.mod
> objects\clue.mod
> objects\instlpk.mod
> objects\msgcat.mod
> objects\ns.mod
> objects\nsaddr.mod
> objects\nsr.mod
> objects\nssrch.mod
> objects\omfchck.mod
> objects\pk.mod
> objects\readers.mod
> objects\strtok.mod
> objects\symlop.mod
> objects\addr\lin32.mod
> objects\omfchck\aout.mod
> objects\omfchck\elf.mod
> objects\omfchck\gpa.mod
> objects\omfchck\ieee695.mod
> objects\omfchck\omf386.mod
> objects\omfchck\omf86.mod
> objects\omfchck\omf96.mod
> objects\omfchck\ticoff.mod
> objects\readers\aout.mod
> objects\readers\elf.mod
> objects\readers\gpa.mod
> objects\readers\ieee695.mod
> objects\readers\omf386.mod
> objects\readers\omf86.mod
> objects\readers\omf96.mod
> objects\readers\omni.mod
> objects\readers\ticoff.mod

It's on the site but a bit hided ..
ftp.agilent.com/pub/callpub3/ddt/portbls/166xC_CS/SYMBOLS

This should be the correct symbol library..

-Rik




More information about the cctech mailing list