bqt at softjar.se
Wed Jan 21 11:43:34 CST 2009
Glen Slick <glen.slick at gmail.com> wrote:
> In the VS11-FX/HX/JX Raster Graphics System Installation Manual
> EK-VSFHJ-IN-001 there are illustrations of this box being used in
> combination with a VRV02-AA/AB color monitor where the box is refered
> to as the "keyboard interface box" and the combination of the monitor
> and the "keyboard interface box" makes up the VRV02-FA/FB.
> The "keyboard interface box" video output feeds into the VS11 where
> the terminal video output is then fed back out along with the VS11
> raster graphics output to the monitor.
> The VS11 is the M7061-YA / M7062 / M7064 Q-BUS board set.
That don't make sense. The VS11 was a Unibus device. The Qbus equivalent
was the VSV11, which was then replaced by the VSV21 (I have one of those).
Ah, looking at the field guide, the M7061/7062/7064 *is* a VSV11.
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
More information about the cctech