wire wrap machine pins

[Tony Duell]

> 
> On 6 Jun 2009 at 18:31, Tony Duell wrote:
> 
> > > > A short piece of copper tubing and a hammer work wonders. 
> > > 
> > > Right!  The same is true in labor negotiations, as well....
> > 
> > And a reasonable substitue for a clue-by-four...
> 
> I machined a tool for this from a piece of 1/4" brass rod.  A light 

For what? Remoing wire-wrap contacts, or 'educating' lusers?

> tap on the end with a rawhide hammer does the trick without bending 
> the pin.

-tony