Looking for DEC QVSS (M7602) manual or dip-settings

[Josh Dersch]

I'll check there, thanks for the suggestion.  For the time being I 
soldered on a pair of RCA connectors and have the bulkhead/QVSS 
connected via a standard RCA cable (easily removed) and it appears to 
work.  So, huzzah!

Josh

Ian King wrote:
> Have you asked at Vetco?  From memory I think I know what connector you're talking about and I'm pretty sure I've seen it there.  -- Ian
> ________________________________________
> From: cctalk-bounces at classiccmp.org [cctalk-bounces at classiccmp.org] On Behalf Of Josh Dersch [derschjo at mail.msu.edu]
> Sent: Thursday, March 19, 2009 2:20 AM
> To: On-Topic and Off-Topic Posts
> Subject: Re: Looking for DEC QVSS (M7602) manual or dip-settings
>
> Ah, never mind -- was just taking a closer look at the board and found a
> tiny tiny coax video connector on both the QVSS board and the bulkhead.
> Looks like this must carry the video signal.  Not sure what kind of
> connector that is... anyone know?  (I can provide pictures if necessary...)
>
> Thanks,
> Josh
>
> Josh Dersch wrote:
>   
>> Got myself a QVSS video board that I'd like to run in my MicroVAX II,
>> but either it's configured incorrectly or it doesn't work.  Anyone
>> have a manual scanned or a list of the dip-switch settings for this?
>> I can't find any useful info on the 'net.
>>
>> Symptoms are that the Keyboard responds (beeps at power up, I can hear
>> the keyclick when I type, and the VAX seems to be responding to input)
>> but I get no video or sync on the monitor (a VR262).  Monitor,
>> keyboard, and cable all work fine on my MicroVAX 2000, so something
>> must be up with the QVSS.
>>
>> Thanks,
>> Josh
>>
>>
>>     
>
>
>
>
>