New old products :)
Alexandre Souza - Listas
pu1bzz.listas at gmail.com
Tue Apr 13 07:05:41 CDT 2010
>Lessons learned were:
>Increase PAD size :) these are solderable, but are just a touch too small
>by the software default.
I'd ask you which software, but it is probably eagle with its
too-small-to-solder pads ;)
>Quadruple check that all wires and nets are present. I discovered that a
>trace between 2 pins on the connector(s) disappeared on me at some point
>during editing, it is entirely possible I deleted it like an ID10T. So for
>this run of boards, wire-wrap wire will be my friend to jumper the 2 pins
Next time, use kicad, diptrace or something useful. Eagle sux.
More information about the cctech